Arctic gmbh ARCTIC P8 Slim PWM PST Fan, 4-pin, 80mm, Black

Fan P8 Slim PWM PST, 4-pin, 80mm, black.


Features:
Ideal for small spaces.Unlike standard 80 mm case fans with a thickness of 25 mm, the P8 Slim PWM PST has a mounting height of only 15 mm. This makes it the ideal choice for Small Form Factor (SFF) builds.
300 to 3000 rpm controlled via PWM PST. With a wide speed range and innovative PWM Sharing Technology (PST), the P8 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.
High-quality sleeve bearing. Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly.
Optimised for static pressure. Maximum smoothness, minimum vibration. The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling.
Improved service life. The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. The lower coil temperature therefore multiplies the service life and reduces frictional losses for more efficient operation.
0dB Mode - Zero rpm. The speed of the P8 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand.


Specifications:
Fan speed: 300-3000 RPM (0 rpm below 5% PWM).
Air flow: 22.50 CFM / 38.23 m³/h.
Static pressure: 2.35 (mm / H2O).
Fan bearing: Fluid dynamic bearing.
Current / voltage: 0.095A / 12V DC.
Connection: 4-pin connector.
Cable length: 400+80 mm.
Size: 80x80x15 mm.
Weight: 45 g.


Warranty: 6 years.